Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LNG Tank Cooling with LN2

Status
Not open for further replies.

rruipere1

Petroleum
Oct 30, 2007
7
0
0
US
Hello Folks, I wonder if somebody has ever made the cool down of an LNG tank using liquid nitrogen.
Thanks.
 
Replies continue below

Recommended for you

Hello Folks, I wonder if somebody has ever made the cool down of an LNG tank using liquid nitrogen.
There's no reason why you couldn't, as long as the tank was designed and built to handle both the temperature and weight. Note that the temperature is low enough the manufacturer will need to use typical steels used in the manufacture of any cryogenic tank, but the density is considerably lower. Verify with the manufacturer that the tank can handle the weight.
 
I use a truck load of liquid nitrogen to cool down my LNG plant before I start it up, its cheaper. You don't need to fill the tank, just add enough to chill it down.
 
Status
Not open for further replies.
Back
Top