I know I'm doing this wrong, can someone point me in the right direction? I'm making a blueprint for a fixture with three separate pieces that fit together. The first page should show all three. The second page I just want one of the pieces. Currently I suppress the body I dont want to see, so it doesn't show up but that of course makes it disapear from sheeet 1. Do I turn off auto update? Seems like there is an easier way. Is there a way when I create a Base View to only display one of the three connected bodies?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Multi-body print question 1
- Thread starter heythere
- Start date
-
1
- #2
It sounds like all the bodies are in the same files as the drawing?
If that's the case, use 'Layer Visible in View' to control the layers shown in the drafting views.
The attached video explains how to do it.
Anthony Galante
Senior Support Engineer
![](https://res.cloudinary.com/engtips/image/fetch/w_800,c_lfill,q_auto,f_auto,g_faces:center/[URL unfurl="true"]http://i1306.photobucket.com/albums/s580/namdaci/signature_videoCenter_zps09c916dc.jpg[/URL])
NX3 to NX11 with almost every MR (24versions)
If that's the case, use 'Layer Visible in View' to control the layers shown in the drafting views.
The attached video explains how to do it.
Anthony Galante
Senior Support Engineer
NX3 to NX11 with almost every MR (24versions)
- Thread starter
- #3
If you've set it up as an assembly you can also hide/show specific components on a per view basis. Use command finder for "hide show component in view".
Tim Flater
NX Designer
NX 9.0.2.5 Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M
Tim Flater
NX Designer
NX 9.0.2.5 Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M
- Status
