Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

new HVAC engineer

Status
Not open for further replies.

wellman

Mechanical
Mar 28, 2003
29
I am about to start a new job with a consulting firm where I will mostly be doing HVAC design. I have been out of school about five years and this was the last time I did much in this feild. I have been working for a manufacturing company in a seperate industry since then. Any suggestions on what topics or fundamentals I should look back over from my school textbooks and notes to help in the transition.

Thanks
 
Replies continue below

Recommended for you

Your goal in my estimation is to develop as many sources of ready information as you can and become proficient at research, from such sources as the internet, web sites such as this, books and never be afraid to ask questions from anyone who you think can provide information. Never get discouraged and above all never give up and you will be successful! Oh, one more thing, there is a lot of software to help you today.
 
I have been working in this industry for about 5 years and find the secret is to read. I have a book I am going through right now that covers the basics. I wanted to go over the basics to make sure there are no gaps in my understanding and then I plan to get into the Trane Air Conditioning Manual. Stepping stone approach. Some of what I am reading now is simple stuff, but I just felt it was worthwhile to go over it all. I feel I have a lot to learn compared to some of the other people on this forum. The knowlege of the people on this forum is great and they are keen to help. This forum and the people that contribute is also something that guides my development as a HVAC Designer.
 
Get Mark's guide for Mechanical Engineering. Do it now, learn the HVAC portions well, and by the time you need to take your PE you should be set.

Pick up the ASHRAE manuals too, and peruse them once a day/week when you have the chance.

John Peterson
 
Good common sense is my advice. If it looks right, it probably is right.

Get a few good books and listen to your senior engineers. Don't be afraid to ask....thats what we're for.

Good luck.

Friar Tuck of Sherwood
 
Start with the Carrier Handbook of Air Conditioning system Design.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor