Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIEMENS GT 94.02

Status
Not open for further replies.

abo2eyes

Electrical
Nov 9, 2011
18
0
0
hello
what will happen if we did not close compressor wash drains when we are starting up the turbine ?



HELP SYRIA
 
Replies continue below

Recommended for you

Nothing Much,

Air will blow out the drains until you close them. If you continue to run with the drains open you will lose some performance. How much is dependant on the drop in compressor discharge pressure.
 
I believe running with the drains open would be like adding recycle to the compressor so it may move the machine away from the surge line. It would also reduce the efficiency somewhat. There may be other considerations depending upon the plumbing of the drains and the gases involved.
 
Status
Not open for further replies.
Back
Top