siemens nx learning by video

[vnmold86]

1. design car seat covers in siemens nx with these command below:
Extrude, Split body, offset curve in face, Soft blend, Unite, Divide face, X-form, Edge blend

https://www.youtube.com/watch?v=g5OZ0MFFltI

2. design shoes use these commands below: Bridge curve, Join curve, Combined projection, Extrude, Through curves, Trim sheet, Through curve mesh, Curve length, Sew, Thicken

https://www.youtube.com/watch?v=oNLXJeoewRo

http://mechanism3ddesign.com/

 

[vnmold86]

design a bottle in siemens nx by these commands below: extrude, datum plane, though curve mesh, mirror feature, sew, bounded plane, face blend, through curves, thicken, threads

https://www.youtube.com/watch?v=nxTq9G4HFhE

http://mechanism3ddesign.com/

 

[Ehaviv]

Do you have thes tutorials in pdf files

 

[vnmold86]

i made video only. Sorry. Do you need Prt file?

http://mechanism3ddesign.com/

 

[Ehaviv]

Yes. I'm very thank you.

 

[vnmold86]

Hi a984928, sorry about my late,
Pls, check file.

http://www.mediafire.com/file/1sy56677l9aaaj0/shoes2.prt

http://www.mediafire.com/file/tsz5ewrfe4q2knw/car_seat_covers.prt

http://mechanism3ddesign.com/