Sketch link with wave linker problem

[Ehaviv]

Hi

I usually links sketches with wave linker
without problems.

But recently I noticed that if
the sketch contains splines curves
then I can't do link the sketch.
by choosing sketch from the drop down
window options.
But l can do link by choosing composite
Curves.

Is that the situation?
If not please tell me how to do that.

Thank you in advanced.

 

[jerry1423]

Here is a previous post on that subject.
It is a bit old, but it should be able to help you. It does look like it needs to be a composite curve.

https://www.eng-tips.com/viewthread.cfm?qid=249551

Jerry J.
UGV5-NX1884

 

[Ehaviv]

Hi Jerry and thank you very much.

That's deal with direct link of a spline.

and my case is link a sketch that
contains a splines.

 

[Ehaviv]

Sory in trying again I succeed to
link a sketch of splines.

I don't know why in the first trying
I failed to do a link.

 

[jerry1423]

Thanks for the update

Jerry J.
UGV5-NX1884