Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

well control

Status
Not open for further replies.

athir

Petroleum
May 3, 2013
2
0
0
when i was reading about the well control i saw some thing says that the ((a kick could cause a drill pipe to stuck )) so Im wandering how that could happen .
Thanks
 
Replies continue below

Recommended for you

A kick can cause a drill pipe stuck because when you have a kick that means the drill bit will not have enough time to mill/grind the formation so that will lead to cuttings being at bigger sizes than expected which means again that these cuttings may not be lifted up to surface and thus eventualy may cause a stuck pipe since it will gather down-hole.
 
Status
Not open for further replies.
Back
Top