Hi Everyone ,
Please reccommend and explain a technique on coloumn cut-lift-join-weld technique to increase gap distance between platforms P1 and P2.
curretnly its 120 cm , i want it to be 220cm in total , so 100cm i will be increasing the 80mm x 80mm x 3mm RHS column heights .
But im stuck...
Thank you so much for the response
Yes , I agree i'm so noob in FEA, but i would appreciate if you guys can give me some sources where i can study well the basics, i went through many videos in the youtube but those aren't helping much
or if you can please perform on this one and let me...
Hi ,someone please help me to get the capacity of a foot bracket
Objective : Find max capacity of the foot bracket(please refer the image for more details)
total bracket carrying load : 800N (80kg)
Softwares i use for FEA : Inventor & Solidworks
As i'm a designer , i'm not much involved in FEA...
1. In NX i used to join these two different sections using through curves or through curve mesh with tangent relation between each sections!
2. In solidworks i used to connect these helical thread using 3D arc with tangent relation btwn edge and the curve then loft two sections using 3D...
Hi i amusing NX 12,
suppose if i change the scale of parent view ,it child views also should update to to the same scale!
how i enable it in NX drafting?
please tell me ,...
why i'm not able to choose the shaft horizontal edge to create a dimension during sketching!
I have to create construction line to give dimension , is there any settings in NX12.0 to enable this edges to get snapped while sketching?
please let me know.
FYI iam using NX12.0
Hi i am using NX12.0
when try to extrude something by selecting a face or any reference using 'until selected' option, i get an error 'unable to trim-change the trim type/data' prompt.
Please help me to find out what is my mistake
How to align jumbled multiple dimensions to a straight single line horizontally or vetically in same selecting all the dimension at once.
Below picture will describe the requirement.
when I start a sketches on any existing models by snapping an edge or the face, sketch still be not constrained to the point where i have snapped, sketch still will be unconstrained and free to move in all DOF.
is there any setting that i could set to contrain on choosen edge or point...
Hi , I am using NX12
When i open any step file containing an assembly in it > I save it to .prt > taken it to drafting > my drafting template turned to gray color and i was not able to edit the layer of the template like "title block, borders & marginds" and even the dimension text formats...
HI everyone,
I want to send a client drafting file to add some information from there end.
But i want to hide or lock 3D model linked to that drafting file.
or atleast i want to hide the feature design tree of the model, my boss don't want us to show the client what are all commands we have...
suppose my objective :
creating two shafts
1. shaft ∅20x 50 L
2. shaft ∅ 30 x 100L.
what i would do is in solidworks.
1.i'll create two shafts as differnt part files.
2. create complete drafting file for using any one of the shaft, let's say ∅20 x 50L.
3. save as a copy that drafting file for...
yes surface are drafted , its a trapezoidal section
of one base 22mm and another base 17.3mm,
face blends can be only applied to the surface faces , when i activate face blend to apply blend to these slots , i am not able to choose the individual faces in single body.
you can please try once...
Please tell me how to give an edge blend or round fillet choosing 3 faces in the one body .
1. sometimes it is necessary to choose the faces of the body so fillet command should decide the appropriate fillets for those but in NX i am not able give such blends
2.is there any hidden commands...
