Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Extract Body & Wave Linker 2
- Thread starter skanskan
- Start date
-
1
- #2
- Thread starter
- #3
-
1
- #4
EXTRACT BODY is used to replicate a body that is defined within the same part-file. Use TimeStamp to allow the positioning of the EXTRACT BODY feature within the History Tree of the Part Navigator, otherwise, the EXTRACTED BODY feature will be pushed down the History Tree whenever features are added to the original BODY.
WAVE GEOMETRY LINKED BODIES are created in the current Work Part and are (usually) linked to a body in a different component within the assembly.
NXHerbie
NX7.5/TCe2007
WAVE GEOMETRY LINKED BODIES are created in the current Work Part and are (usually) linked to a body in a different component within the assembly.
NXHerbie
NX7.5/TCe2007
- Status
