Garland23
Mechanical
- Dec 4, 2021
- 126
In Fig. 11-29, I'm fine with the idea of profile and position combined. My only question is why they refer to paragraph 7.17?
For each figure in Y14.5, they provide one or more paragraph numbers (in the lower corner of the graphic) that link to the idea being depicted. I'm wondering if this one is an error, because none of the datums are irregular features of size (or FOS of any kind).
For each figure in Y14.5, they provide one or more paragraph numbers (in the lower corner of the graphic) that link to the idea being depicted. I'm wondering if this one is an error, because none of the datums are irregular features of size (or FOS of any kind).