Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MSC Apex application

Status
Not open for further replies.

Ace-737

Industrial
Dec 27, 2023
3
RU
[highlight #204A87][/highlight][COLOR=][/color]
Hi everyone, I'm working on the laser welding simulation with MSC Apex. I need to get welding parts meshed to get them exported to MSC Welding for further simulation. I faced a one problem. Having imported required geometry, I got one of the parts looking as unmeshable i.e. requiring the geometry to be fixed. Here the issues are starting. Before the geometry can be edited it should be set as a "Current" via a context menu (right mouse click) But as soon as an arrow (mouse pointer) hangs over the item I'd like to edit, the whole window gets down and the error message appears stating the serious error occurred and the application must be restsrted. Thus every attempt to make a right mouse click causes the same reaction. Is anybody knows what the reason it happans on? And how it could be resolved?
 
Replies continue below

Recommended for you

Hello Sir, i have the same problem. Did you find a solution? Please help me.
 

Hi, so far I neither got some respond regarding my question nor was able to find an answer by myself...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top