Search results for query: *

Hi JavadM, For NX12, the default output from $mass attribute in Part Lists is in "gram". To change to Kilogram, we can scale the values using steps below: 1. Go to the Settings tab of the column. Go to Cell tab, check Evaluate Cell as Formula, and set Decimal Places as you preferred. 2. Go to...

As far as we know, it has capability for trim line optimization. But for more detail, it is better to check with ETA directly. If you are at ASEAN region, probably we can try to follow up for you. Below is just some info on Dynaform. http://www.dtsys.my/cae/eta-inventium-suite/dynaform/ Kind...

After some check, as long as you are not using moment load, the FEA result will be fine. In my test, k6rot only plays a role when moment load is applied in the out of plane direction of 2D mesh. Tuw

right Toost:) In NX / Simcenter, we can integrate FEA and Motion Simulation together, called Flexible Body Analysis. This is an advanced topic to give flexibility to a rigid body (thus making it a flexible body or finite element body) defined in Motion Simulation, to evaluate for displacement...

Since I am not a Sales person, I dont know the exact price. But what I know is Dynaform is permanent license, while Autoform is yearly subscription. That is to say, you only need to pay once for Dynaform and you can use it for many years. Autoform needs to pay every year. Also, do take note...

Hello Wazy01, Strain result is not computed by default. The default results computed are: 1. Displacement 2. Stress 3. Reaction force To request additional output result, you need to select Strain in the Output Request. To do that, 1. In Simulation Navigator, in Sim mode, right-click your...

Hello CAD2015, Advanced Simulation - is Finite Element Analysis (FEA). One body will be cut into many pieces, many points. Thus 1 body will have many calculation points, and the body can be deformed to give deformation and stress result. Motion Simulation - is rigid body Analysis. One body...

Hello ninjaz, No matter how you model the spot weld, stress concentration will always be at the edge of the spotweld diameter, is it not? There are options to model the spot weld using 1d element or 3d element though. Tuw

Hello TiagoFigueiredo, Dynaform is better alternative to Autofoam. Not only in price comparison, but dynaform is able to simulate spring back, which i dont think Autoform can do (I am happy to be proven wrong though). Presys is the successor to Dynaform, but i am not sure how well Presys is. Tuw

Hi nidhs, Sorry for late reply. Below is what I found from GTAC solution center. Support for TSV on Windows 64-bit Platform Symptom --------------- Support for TSV (Tolerance Stackup Validation) on Windows 64 bit platform. Hardware/Software Configuration Platform: INTEL OS: WINDOW OS Version...

Hello 5H4D0W, If you want to control the mesher to be exact size, you will need to use Mesh Control command, and define the edge of the notch to have specific number of nodes or size. Without using Mesh Control, the 2D mesher is only using 'element size' as an approximation for the overall...

The network connection between the server and client, is unstable and inconsistent. Sometimes it connects, sometimes not. Tuw

Hello albertoruenes, What output request you used to recover membrane force? If you use force output, the output is with reference to the element coordinate system. If you are doing automatic meshing, the element coordinate system would be in chaos, thus high chance that the axis are not...

Hello, the thermal coupling between structural mesh and fluid mesh is automatically done by the solver, provided the meshes are physically near (touching) within tolerance. The reason you are not seeing the heat transfer maybe the meshes are too coarse. Maybe you need to define boundary layer...

Hello, Some tips on using 2D dependent mesh in NX. 1. Make sure both polygon faces have the same number of edges. 2. Make sure the edge's end point is having the same pattern for both polygon faces. For example, the end point of the hole, between both polygon faces are not same pattern, and...

Hello Tejras, In my opinion, you need to reverse the color of the contour. Usually red color is refer to "danger", but in your case, strength safety factor of 4455.88 is very safe. According to NX Documentation, when analyzing durability results, failure occurs when for strength safety factor...

Hello Oscar, I am not Femap user but I am literate with NX Nastran. Possible to share your input file (.dat)? By the look of your image attached， are you using contact element? Contact element serves as spring element in Solution 101. Kind regards, Tuw http://www.dtsys.my http://www.dtsys.sg

Hi Tejras, No attachment? Please re-attach. Kind regards, Tuw http://www.dtsys.my http://www.dtsys.sg

Hi, Just to update. I manage to output punch file, using the above output request. The reason I cant previously is because the simulation model have singularity problem. Thanks for your time. Kind regards, Tuw http://www.dtsys.my http://www.dtsys.sg

Hello All, I have difficulty in outputting punch file (.pch file) from NX Nastran. I have tried to edit the output request as below: DISPLACEMENT(PUNCH,REAL) = ALL SPCFORCES(PUNCH,REAL) = ALL STRESS(PUNCH,REAL,VONMISES,CENTER) = ALL , Below is the view of the solving directory after solving...