Search results for query: *

Try loading the assy with structure update on load set to none 1. Close all parts 2. Menu->Preferences->Teamcenter Integration->Assembly Tab 3. Change the structure update on load to None and OK the dialogue (Take note of what this is set to initially). 4. Now attempt to load the assy If it...

NX-I-deas 6.4 is the latest version of I-deas.(The paired NX version is 9) This will run on Win 7 64bit). Have you attempted to install this? Do you have any error messages you could share? You will of course need an version 6.4 licence to run the product.

Your first screen shot shows that you're looking at an empty TDM. You're data currently resides in a model file which needs to be checked into a library to use the interoperate function. Open Manage Bins and you'll be able to see your assembly/parts and check them into the library. You will be...

Info from the help docs: "The Sequential order, which is only available in managed mode, uses the Callout attribute to order the nodes."

Check the MF Assoc report in manage libraries: Mange Libraries->Highlight assy->Click MF Assoc report There is an option to delete the relationship if necessary: (Delete Rel)

I've seen similar issues where I-deas will crash when exporting large xpk files. The fix for me was to adjust the memory autosetting value in the param file. Try changing it to 1 or 2 Memory.Autosetting: 1 You can find the location of your ideas_param17.dat by running STAT_IDM in dmadmin...

Have you installed the translators? They are located on a separate disk/ download for NX4. If the following directories are missing, you haven't installed them: %UGII_BASE_DIR"\IGES %UGII_BASE_DIR"\STEP

If there are no strange characters in the filenames etc, take a look at the part attributes in native for some of these parts. I've had issues previously with the import process reading the attributes which seemed to cause a conflict in TC. Is "drawing-name" an attribute in one of these files?

Try running idfvfy on the model file: Idfvfy.cmd -v c:\temp\model_files\modelfile.mf1 If it's showing errors, try the following: (Make a backup of the model file before doing this) Idfvfy.cmd –p c:\temp\model_files\modelfile.mf1 0 5 0 Check for errors again: Idfvfy.cmd -v...

Hi All, The setup is described in the I-deas documentation. Just search for the variable. I have set this up previously and lauched using a userprof.prg as recommended. I'm not sure if the setup requires a paired environment ie NX-I-deas6.3 = NX8.5

Take a look at your save options. Do you have "Save data for fast rollback and edit" ticked? This setting stores additional information in the part file which helps to reduce the feature update time. I think it's switched on as default. Turning this off may improve the situation. (Just make a...

Try offsetting the surfaces of the hose to a value which is approx 0.1mm less than the radius of the hose. Now run an iso curve curve along each of the offset surfaces. Measure the total length of the curves. Not 100% accurate but probably good enough.

I've seen a similar issue with notes in the passed where NX would query the licence server for a particular Teamcenter increment in the licence file each time the note dialogue was launched. This was causing a noticable delay of anything between 2-5 seconds which wasn't evident in native or...

Please note, this pulls an nx_drafting_plus increment from the licence. If you do not have this, you could use dxf, dwg or cgm.

Try the following: I-deas 1. Get the drawing from the Bin->switch to Master Drafting 2. File->Export->AS-Drawing (ASC file) (This will export all sheets so you may need to copy the drawing and delete a couple of the sheets first. Or delete them in NX) NX 3. Open the existing drawing 4...

Try changing your Memory.AutoSetting to 2 in your param file. There is a full explanation of this in the help docs. You could probably add this to your user param file rather than updating the site param for all users. ! AUTOMATED MEMORY TUNING SWITCH ! ----New in Master Series 7---- ...

I recently had an issue where the Anti virus software removed lmgrd.exe from the licencing directory. Check the following folder for this file: (Default locations) C:\Program Files (x86)\UGS\UGSLicensing (64bit) C:\Program Files\UGS\UGSLicensing (32bit) You may may need to check on the server...

Try this: Modify View (1,0,0,297,210,0,0,,,,,,,,)

Try This... 1. Master Drafting 2. File-Calculator 2. Type the following and select done: Modify View (1,0,0,1189,841,0,0,,,,,,,,) The view will reset. This is for an A0 border

I have found that some entities occasionally drop off the side of the sheet. Try increasing the paper size on the drawing sheet to a much large size 10000 x 10000 or similar. Now move all of the views into the middle of the sheet and change border size of all views to the size of the sheet...