Jun 29, 2009 #1 00966531660870 Electrical Jun 29, 2009 1 PLEASE LET ME KNOW ANY ONE HOW WE CAN OPEN INTERROLL DRUM MOTOR.
Jun 29, 2009 #2 stardelta Mechanical Jan 23, 2003 224 Heat around the drum at the lead end, this will melt the sealant and expand the metal, then tap and I say tap, the shaft at the non-lead end. If the drum is rubber coated it will have to be removed prior to applying the heat. Upvote 0 Downvote
Heat around the drum at the lead end, this will melt the sealant and expand the metal, then tap and I say tap, the shaft at the non-lead end. If the drum is rubber coated it will have to be removed prior to applying the heat.
